Step 1 – Make an inside part from the temple to the scruff of the neck
Step 2 – Divide the right half of the head into 4 even areas of hair fanning out from focus part
Your first part ought to go from the inside part down to the front of the right ear. The second part ought to go to about the tip of the ear, and the third part ought to be behind the ear near the ear flap.
Step 3 – Create a rope turn/mesh in each of the 4 areas and secure with elastics
Step 4 – Repeat Steps 2-3 on the left half of the head
Step 5 – Starting on the left half of the head, bring the front turn back toward the second bend and place it on the right half of the second contort, or disregard it the second curve.
Start turning these 2 together to make a Hawser twist. Watch our Hawser mesh video if this doesn't bode well!
Step 6 – Bring the joined 2 turns to one side of the third curve, and wind them together making a thicker turn
Step 7 – Bring the consolidated 3 turns to one side of the last and base curve and contort them together
Step 8 – Once you can no more bend or wind these together, secure the end with a flexible
You may have a few bends that are shorter or more than others, so uproot any elastics that fall underneath this last flexible and go over the tail of your turn to loosen up any abundance turns.
Step 9 – On the right half of the head, bring the front turn back toward the second curve and place it to the right half of the second wind, however it is going under the second bend — not over.
Step 10 – Continue the bending procedure as you did on the left half of the head, conveying the thicker turn to one side of the single turn.
Step 11-Secure each at the bottom with elastic ban.
We appreciate you for reading NewspaperNg Post, but we think it will be better you like our facebook fanpage and also follow us on twitter below.
GET OUR HOT UPDATES DIRECTLY TO YOUR MOBILE PHONE BY TEXTING "FOLLOW Naijawapbase" to 40404